Template:Convert/list of units

The table below lists units supported by template {{convert}}. The list is not complete—more complete lists are linked for each dimension. A complete list is at the full list of units.

The unit-code (column 3), is accepted as input by the template. These can be used as the second or third unnamed parameter. Some units have alternative codes; these are shown in brackets e.g. °F (F): either may be entered for Fahrenheit.

Column 7 lists standard combinations of multiple converted outputs. For example, {{convert|55|nmi|km mi}} produces "55 nautical miles (102 km; 63 mi)". Such a combination must be used as the third unnamed parameter.

Abridged list of units supported by {{Convert}}
Explanation
system	unit	unit- code	symbol or abbrev.	notes	sample default conversion	combination output units
the system(s) to which the unit belongs	units listed by name	unit-code to use in template	symbols shown in output	other notes about the units	sample of the default conversion for the unit	output codes for multiple conversions
LENGTH (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	megametre	Mm	Mm	US spelling: megameter	1.0 Mm (620 mi)
	kilometre	km	km	US spelling: kilometer	1.0 km (0.62 mi)	km mi
	metre	m	m	US spelling: meter	1.0 m (3 ft 3 in)	m ft m ftin
	centimetre	cm	cm	US spelling: centimeter	1.0 cm (0.39 in)	cm in
	millimetre	mm	mm	US spelling: millimeter	1.0 mm (0.039 in)	mm in
	micrometre	µm (um)	μm	US spelling: micrometer	1.0 μm (3.9×10−5 in)
	nanometre	nm	nm	US spelling: nanometer	1.0 nm (3.9×10−8 in)
non-SI metric	ångström	Å (angstrom)	Å		1.0 Å (3.9×10−9 in)
Imperial & US customary	mile	mi	mi		1.0 mi (1.6 km)	mi km
	furlong	furlong	(none)		1.0 furlong (660 ft; 200 m)
	chain	chain	(none)		1.0 chain (66 ft; 20 m)
	rod	rd	rd	For other names of this unit see the full list.	1.0 rd (17 ft; 5.0 m)
	fathom	fathom	(none)	fathom ≡ 6 ft	1.0 fathom (6.0 ft; 1.8 m)
	yard	yd	yd	assumes the international definition	1.0 yd (0.91 m)
	foot	ft (foot)	ft	long code "foot" outputs foot (and never feet)	1.0 ft (0.30 m)	ftin (feet and inches) ft m (foot m)
	inch	in	in		1.0 in (25 mm)	in cm in mm
Other	nautical mile	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	1.0 nmi (1.9 km; 1.2 mi)
	parsec	pc	pc		1.0 pc (3.3 ly)
	light-year	ly	ly		1.0 ly (63,000 AU)
	astronomical unit	AU	AU		1.0 AU (150,000,000 km; 93,000,000 mi)
AREA (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	square kilometre	km2	km2	US spelling: square kilometer	1.0 km2 (0.39 sq mi)	km2 sqmi
	square metre	m2	m2	US spelling: square meter	1.0 m2 (11 sq ft)	m2 sqft
	square centimetre	cm2	cm2	US spelling: square centimeter	1.0 cm2 (0.16 sq in)	cm2 sqin
	square millimetre	mm2	mm2	US spelling: square millimeter	1.0 mm2 (0.0016 sq in)	mm2 sqin
non-SI metric	hectare	ha	ha		1.0 ha (2.5 acres)
Imperial & US customary	square mile	sqmi	sq mi		1.0 sq mi (2.6 km2)	sqmi km2
	acre	acre	(none)		1.0 acre (0.40 ha)
	square yard	sqyd	sq yd		1.0 sq yd (0.84 m2)
	square foot	sqft (sqfoot)	sq ft	long code "sqfoot" outputs square foot (and never feet)	1.0 sq ft (0.093 m2)	sqft m2 (sqfoot m2)
	square inch	sqin	sq in		1.0 sq in (6.5 cm2)	sqin cm2
Other	square nautical mile	sqnmi	sq nmi		1.0 sq nmi (3.4 km2; 1.3 sq mi)
	dunam	dunam	(none)	For alternative spellings and definitions see the full list	1.0 dunam (0.0010 km2; 0.00039 sq mi)
	tsubo	tsubo	(none)		1.0 tsubo (3.3 m2)
VOLUME (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	cubic metre	m3	m3	US spelling: cubic meter one kilolitre	1.0 m3 (35 cu ft)
	cubic centimetre	cm3	cm3	US spelling: cubic centimeter one millilitre	1.0 cm3 (0.061 cu in)
		cc	cc
	cubic millimetre	mm3	mm3	US spelling: cubic millimeter	1.0 mm3 (6.1×10−5 cu in)
non-SI metric	kilolitre	kl	kl	US spelling: kiloliter one cubic metre	1.0 kl (35 cu ft)
		kL	kL
	litre	l	l	US spelling: liter one cubic decimetre Allows triple output units. See: full list.	1.0 l (0.22 imp gal; 0.26 US gal)	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L	L			L impgal L impqt L USgal L U.S.gal L USdrygal L U.S.drygal
	centilitre	cl	cl	US spelling: centiliter	1.0 cl (0.35 imp fl oz; 0.34 US fl oz)
		cL	cL
	millilitre	ml	ml	US spelling: milliliter one cubic centimetre	1.0 ml (0.035 imp fl oz; 0.034 US fl oz)	ml impoz ml USoz ml U.S.oz
		mL	mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	cubic yard	cuyd	cu yd		1.0 cu yd (0.76 m3)
	cubic foot	cuft (cufoot)	cu ft	long code "cufoot" outputs cubic foot (and never feet)	1.0 cu ft (0.028 m3)
	cubic inch	cuin	cu in		1.0 cu in (16 cm3)
Imperial	imperial barrel	impbbl	imp bbl	36 imp gal	1.0 imp bbl (160 l; 36 imp gal; 43 US gal)
	imperial bushel	impbsh	imp bsh	8 imp gal	1.0 imp bsh (36 l; 8.0 imp gal; 8.3 US dry gal)
		impbu	imp bu
	imperial gallon	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list.	1.0 imp gal (4.5 l; 1.2 US gal)	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	imperial quart	impqt	imp qt	1/4 imp gal or 40 imp fl oz	1.0 imp qt (1,100 ml; 38 US fl oz)
	imperial pint	imppt	imp pt	1/8 imp gal or 20 imp fl oz	1.0 imp pt (0.57 l)
	imperial fluid ounce	impoz (impfloz)	imp fl oz	1/160 imp gal	1.0 imp fl oz (28 ml; 0.96 US fl oz)	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	US barrel	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	1.0 US bbl (120 l; 32 US gal; 26 imp gal)
		U.S.bbl	U.S. bbl
	barrel	oilbbl	bbl	42 US gal	1.0 bbl (0.16 m3)
	US beer barrel	USbeerbbl (usbeerbbl)	US bbl		1.0 US bbl (120 l; 31 US gal; 26 imp gal)
		U.S.beerbbl (usbeerbbl)	U.S. bbl
	US gallon	USgal	US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list.	1.0 US gal (3.8 l; 0.83 imp gal)	USgal l USgal L USgal impgal
		U.S.gal	U.S. gal			USgal l USgal L USgal impgal
	US quart	USqt	US qt	1/4 US gal or 32 US fl oz	1.0 US qt (950 ml)
		U.S.qt	U.S. qt
	US pint	USpt	US pt	1/8 US gal or 16 US fl oz	1.0 US pt (0.47 l; 0.83 imp pt)
		U.S.pt	U.S. pt
	US fluid ounce	USoz (USfloz)	US fl oz	1/128 US gal	1.0 US fl oz (30 ml)	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)	U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	US dry barrel	USdrybbl	US dry bbl	105/32 US bsh	1.0 US dry bbl (0.12 m3)
		U.S.drybbl	U.S. dry bbl
	US bushel	USbsh	US bsh	2150.42 cubic inches by definition	1.0 US bsh (35 l; 8.0 US dry gal; 7.8 imp gal)
		U.S.bsh	U.S. bsh
	US bushel	USbu	US bu	2150.42 cubic inches by definition	1.0 US bu (35 l; 8.0 US dry gal; 7.8 imp gal)
		U.S.bu	U.S. bu
	US dry gallon	USdrygal	US dry gal	1/8 US bsh Allows triple output units. See: full list.	1.0 US dry gal (4.4 l)	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal	U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	US dry quart	USdryqt	US dry qt	1/32 US bsh	1.0 US dry qt (1,100 ml)
		U.S.dryqt	U.S. dry qt
	US dry pint	USdrypt	US dry pt	1/32 US bsh	1.0 US dry pt (550 ml)
		U.S.drypt	U.S. dry pt
SPEED (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	metre per second	m/s	m/s	US spelling: meter per second	1.0 m/s (3.3 ft/s)	m/s ft/s (m/s foot/s)
non-SI metric	kilometre per hour	km/h	km/h	US spelling: kilometer per hour	1.0 km/h (0.62 mph)	km/h mph
Imperial & US customary	mile per hour	mph	mph		1.0 mph (1.6 km/h)	mph km/h mph kn
	foot per second	ft/s (foot/s)	ft/s	long code "foot/s" outputs foot per second (and never feet)	1.0 ft/s (0.30 m/s)	ft/s m/s
Maritime units	knot	kn (knot)	kn		1.0 kn (1.9 km/h; 1.2 mph)	kn mph
FORCE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	giganewton	GN	GN	Allows triple output units. See: full list.	1.0 GN (220,000,000 lbf)	GN LT-f GN LTf GN ST-f GN STf
	meganewton	MN	MN	Allows triple output units. See: full list.	1.0 MN (220,000 lbf)	MN LT-f MN LTf MN ST-f MN STf
	kilonewton	kN	kN	Allows triple output units. See: full list.	1.0 kN (220 lbf)	kN LT-f kN LTf kN ST-f kN STf
	newton	N	N		1.0 N (0.22 lbf)	N lb-f N lbf N oz-f N ozf
	millinewton	mN	mN		1.0 mN (0.0036 ozf)	mN oz-f mN ozf mN gr-f mN grf
	micronewton	µN (uN)	μN		1.0 μN (0.0016 grf)	µN gr-f µN grf
	nanonewton	nN	nN		1.0 nN (1.6×10−6 grf)	nN gr-f nN grf
cgs	megadyne	Mdyn	Mdyn		1.0 Mdyn (2.2 lbf)
	kilodyne	kdyn	kdyn		1.0 kdyn (0.036 ozf)
	dyne	dyn (dyne)	dyn		1.0 dyn (0.016 grf)
	millidyne	mdyn	mdyn		1.0 mdyn (1.6×10−5 grf)
Metric gravitational units	tonne-force	t-f	tf		1.0 tf (9.8 kN; 0.98 LTf; 1.1 STf)
		tf	tf
	kilogram-force	kg-f	kgf		1.0 kgf (9.8 N; 2.2 lbf)
		kgf	kgf
	gram-force	g-f	gf		1.0 gf (9.8 mN; 0.035 ozf)
		gf	gf
	milligram-force	mg-f	mgf		1.0 mgf (9.8 μN; 0.015 grf)
		mgf	mgf
Avoirdupois-based units	poundal	pdl	pdl		1.0 pdl (0.14 N)
	long ton-force	LT-f	LTf		1.0 LTf (10.0 kN)	LT-f ST-f
		LTf	long ton-force			LTf STf
	short ton-force	ST-f	STf		1.0 STf (8.9 kN)	ST-f LT-f
		STf	short ton-force			STf LTf
	pound-force	lb-f	lbf		1.0 lbf (4.4 N)
		lbf	lbf
	grain-force	gr-f	grf		1.0 grf (640 μN)
		grf	grf
ENERGY (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	gigajoule	GJ	GJ		1.0 GJ (280 kWh)
	megajoule	MJ	MJ		1.0 MJ (0.28 kWh)
	kilojoule	kJ	kJ		1.0 kJ (240 cal)
	hectojoule	hJ	hJ		1.0 hJ (24 cal)
	decajoule	daJ	daJ		1.0 daJ (2.4 cal)
	joule	J	J		1.0 J (0.24 cal)
	decijoule	dJ	dJ		1.0 dJ (0.024 cal)
	centijoule	cJ	cJ		1.0 cJ (0.0024 cal)
	millijoule	mJ	mJ		1.0 mJ (0.00024 cal)
	microjoule	µJ (uJ)	μJ		1.0 μJ (2.4×10−7 cal)
	nanojoule	nJ	nJ		1.0 nJ (2.4×10−10 cal)
cgs	megaerg	Merg	Merg		1.0 Merg (0.10 J)
	kiloerg	kerg	kerg		1.0 kerg (0.10 mJ)
	erg	erg	(none)		1.0 erg (0.10 μJ)
Watt-hour multiples	terawatt-hour	TWh	TWh		1.0 TWh (3.6 PJ)
		TW.h	TW⋅h
	gigawatt-hour	GWh	GWh		1.0 GWh (3.6 TJ)
		GW.h	GW⋅h
	megawatt-hour	MWh	MWh		1.0 MWh (3.6 GJ)
		MW.h	MW⋅h
	kilowatt-hour	kWh	kWh		1.0 kWh (3.6 MJ)
		kW.h	kW⋅h
	watt-hour	Wh	Wh		1.0 Wh (3.6 kJ)
		W.h	W⋅h
Electron- volt multiples
	gigaelectronvolt	GeV	GeV		1.0 GeV (0.16 nJ)
	megaelectronvolt	MeV	MeV		1.0 MeV (0.16 pJ)
	kiloelectronvolt	keV	keV		1.0 keV (0.16 fJ)
	electronvolt	eV	eV		1.0 eV (0.16 aJ)
	millielectronvolt	meV	meV		1.0 meV (0.16 zJ)
Calorie multiples	calorie	Cal	Cal	The thermo-chemical calorie is the default definition. For others, see the full list.	1.0 Cal (4.2 kJ)
	megacalorie	Mcal	Mcal		1.0 Mcal (4.2 MJ)
	kilocalorie	kcal	kcal		1.0 kcal (4.2 kJ)
	calorie	cal	cal		1.0 cal (4.2 J)
	millicalorie	mcal	mcal		1.0 mcal (4.2 mJ)
pound/ ounce-foot/ inch-hour-minute-second	foot-poundal	ftpdl	ft⋅pdl		1.0 ft⋅pdl (0.042 J)
	foot-pound force	ftlbf	ft⋅lbf		1.0 ft⋅lbf (1.4 J)
		ftlb-f	ft⋅lbf
	inch-pound force	inlbf	in⋅lbf		1.0 in⋅lbf (110 mJ)
		inlb-f	in⋅lbf
	inch-ounce force	inozf	in⋅ozf		1.0 in⋅ozf (7.1 mJ)
		inoz-f	in⋅ozf
	horsepower-hour	hph	hp⋅h		1.0 hp⋅h (0.75 kWh)
British thermal unit	British thermal unit	Btu	Btu	The International Steam Table British thermal unit is used. For others, see the full list.	1.0 Btu (1.1 kJ)
		BTU	BTU
TNT-based units	gigatonne of TNT	GtTNT	(none)		1.0 gigatonne of TNT (4.2 EJ)
	gigaton of TNT	GtonTNT	(none)
	megatonne of TNT	MtTNT	(none)		1.0 megatonne of TNT (4.2 PJ)
	megaton of TNT	MtonTNT	Mt
	kilotonne of TNT	ktTNT	(none)		1.0 kilotonne of TNT (4.2 TJ)
	kiloton of TNT	ktonTNT	kt
	tonne of TNT	tTNT	(none)		1.0 tonne of TNT (4.2 GJ)
	ton of TNT	tonTNT	(none)
Other
	Hartree	Eh	Eh		1.0 Eh (27 eV)
	rydberg	Ry	Ry		1.0 Ry (14 eV)
	tonne of oil equivalent	toe	toe		1.0 toe (42 GJ)
	barrel of oil equivalent	BOE	BOE		1.0 BOE (6.1 GJ)
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)		Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	1.0 cubic foot of natural gas (1.1 MJ)
	latm	latm	(none)		1.0 latm
		Latm	Latm
	impgalatm	impgalatm	(none)		1.0 impgalatm
	USgalatm	USgalatm (usgalatm)	(none)		1.0 USgalatm
		U.S.galatm (usgalatm)	U.S.galatm
TEMPERATURE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	K	K	K	Allows triple output units. See: full list.	1.0 K (−272.15 °C; −457.87 °F)	K °C (K C) K °R (K R) K °F (K F)
	°C	°C (C)	°C		1.0 °C (33.8 °F)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	°R	°R (R)	°R		1.0 °R (0.556 K; −458.670 °F; −272.594 °C)	°R K (R K) °R °C (R C) °R °F (R F)
	°F	°F (F)	°F		1.0 °F (−17.2 °C)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change		Used for temperature intervals instead of actual temperatures Example:  {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer
	Fahrenheit change	F-change		Used for temperature intervals instead of actual temperatures Example:  {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder
MASS (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	kilogram	kg	kg	Allows triple output units. See: full list.	1.0 kg (2.2 lb)	kg lb kg st
	gram	g	g		1.0 g (0.035 oz)	g oz
	milligram	mg	mg		1.0 mg (0.015 gr)	mg gr
	microgram	µg (ug)	μg		1.0 μg (1.5×10−5 gr)
non-SI metric	tonne	t	t	Allows triple output units. See: full list.	1.0 t (0.98 long tons; 1.1 short tons)	t LT t ST
	metric ton	MT	t			MT LT MT ST
Avoirdupois	long ton	LT	(none)	2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list.	1.0 long ton (1.0 t)	LT t LT MT LT ST
		long ton	long ton
	short ton	ST	(none)	2,000 lb used mostly in the US. Allows triple output units. See: full list.	1.0 short ton (0.91 t)	ST t ST MT ST LT
		short ton	short ton
	stone	st	st	14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list.	1.0 st (14 lb; 6.4 kg)	st kg st lb
	pound	lb	lb	Allows triple output units. See: full list.	1.0 lb (0.45 kg)	lb kg lb st
	ounce	oz	oz		1.0 oz (28 g)	oz g
	drachm	drachm	(none)		1.0 drachm (1.8 g)
	drachm	dram	(none)
	grain	gr	gr	equivalent to the troy grain	1.0 gr (0.065 g)
Troy	troy ounce	ozt	ozt		1.0 ozt (1.1 oz; 31 g)
other	carat	carat	(none)		1.0 carat (0.20 g)
TORQUE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
Industrial
SI	newton-metre	Nm	N⋅m	Triple combinations are also possible. See the full list.	1.0 N⋅m (0.74 lbf⋅ft)	Nm kg.m Nm lb.ft
Non-SI metric	kilogram metre	kg.m	kg⋅m		1.0 kg⋅m (9.8 N⋅m; 7.2 lb⋅ft)	kg.m Nm kg.m lb.ft
Imperial & US customary	pound force-foot	lb.ft	lb⋅ft		1.0 lb⋅ft (1.4 N⋅m)	lb.ft Nm lb.ft kg-m
Scientific
SI	newton-metre	N.m	N⋅m	Triple combinations are also possible. See the full list.	1.0 N⋅m (0.74 lbf⋅ft)	N.m kgf.m N.m lbf.ft
Non-SI metric	kilogram force-metre	kgf.m	kgf⋅m		1.0 kgf⋅m (9.8 N⋅m; 7.2 lbf⋅ft)	kgf.m N.m kgf.m lbf.ft
Imperial & US customary	pound force-foot	lbf.ft	lbf⋅ft		1.0 lbf⋅ft (1.4 N⋅m)	lbf.ft N.m lbf.ft kgf.m
DENSITY (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
Metric	kilogram per cubic metre	kg/m3	kg/m3		1.0 kg/m3 (1.7 lb/cu yd)	kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd)
	gram per cubic metre	g/m3	g/m3		1.0 g/m3 (0.0017 lb/cu yd)	g/m3 kg/m3 g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial & US customary	pound per cubic foot	lb/ft3	lb/cu ft		1.0 lb/cu ft (0.016 g/cm3)	lb/ft3 kg/m3 (lb/cu ft g/m3) lb/ft3 g/m3 (lb/cu ft g/m3)
	pound per cubic yard	lb/yd3	lb/cu yd		1.0 lb/cu yd (0.59 kg/m3)	lb/yd3 kg/m3 (lb/cuyd kg/m3) lb/yd3 g/m3 (lb/cuyd g/m3)
PRESSURE
	unit	unit- code	abbrev- iation		sample default conversion
	gigapascal	GPa	GPa		1.0 GPa (150,000 psi)
	megapascal	MPa	MPa		1.0 MPa (150 psi)
	kilopascal	kPa	kPa		1.0 kPa (0.15 psi)
	hectopascal	hPa	hPa		1.0 hPa (0.015 psi)
	pascal	Pa	Pa		1.0 Pa (0.00015 psi)
	millipascal	mPa	mPa		1.0 mPa (1.5×10−7 psi)
	millibar	mbar	mbar		1.0 mbar (1.0 hPa)
		mb	mb
	decibar	dbar	dbar		1.0 dbar (10 kPa)
	bar	bar	(none)		1.0 bar (100 kPa)
	kilobarye	kBa	kBa		1.0 kBa (1.0 hPa)
	barye	Ba	Ba		1.0 Ba (0.10 Pa)
	standard atmosphere	atm	atm		1.0 atm (100 kPa)
	torr	Torr	Torr		1.0 Torr (0.13 kPa)
	millimetre of mercury	mmHg	mmHg		1.0 mmHg (0.13 kPa)
	inch of mercury	inHg	inHg		1.0 inHg (3.4 kPa)
	pound per square inch	psi	psi		1.0 psi (6.9 kPa)
FUEL EFFICIENCY
	unit	unit- code		notes		combinations
	kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp				mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi				impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lowercase hp for horsepower, for example)
POPULATION DENSITY
	unit	unit- code		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha
COST PER UNIT MASS
	unit	unit- code		notes		combinations
	dollars per pound	$/lb		"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg				(none)
	dollars per troy ounce	$/ozt		12 troy ounces in 1 troy pound		(none)